Volumetric flow controller VAQS
®
08/23 - 15
Construction subject to change.
No return possible!
09.05.2019
Version:
Startup using the setting and diagnostic device ZTH
EU (Belimo)
Short description
The VAV setting device ZTH EU allows efficient testing of VAV
and CAV installations. Installations fitted with the Belimo VAV
controller can be simply adapted to the room and user require-
ments.
The VAV setting device ZTH EU replaces the previous setting de-
vice ZTH-GEN (2007-2014).
All standard Belimo VAV controllers with integrated PP commu-
nication (from 1992) that are sold in the EU can be set using the
ZTH EU.
Specifications:
easy, quick setting of the VAV boxes parameters
diagnostic function
one tool for all VAV units
voltage supplied by VAV controllers - no batteries required!
service socket VAV / CR24 controller, PP connection
includes connecting cable RJ12 6/4, 6-pin plug
New generation, MP bus tester
for functional test of MP bus
backward compatible with all Belimo PP / MP units from 1992
efficient handling, can be operated with one hand
Selection of stages for test (OPEN/CLOSE/MIN/MAX/STOP)
Damper position indicator for diagnostics
Display of the setpoint / actual volume and V
min/max
setting in
m³/s (l/s).
Keys / Display:
2 x 16-digit LCD with background lighting
Connection:
Locally via service socket
Dimensions:
85x65x23 (WxHxD)
Connection and supply
Stand-alone operation:
Connection including supply takes place via the service socket
at the VAV controller or via the terminals.
Bus operation:
The ZTH EU can be used in the following units while the bus is
running if it is connected via the local service socket: VAV-Com-
pact L/N/SMV-D3-MP, NMVAX-D3-MP, L/NMV-D3LON.
With the VRP-M, L/NMV-D3-M and NMVAX-D3-MP, the MP bus
must be disconnected when the service socket is used.
Restriction:
Direct connection in an MP network or via an MP-Bus master is
not possible.
The ZTH EU comes with a quick start guide de/en to be affixed
to the back of the unit.
Forwards / Backwards
Change value / status
OK
Confirm input
ESC
Cancel input/ Leave submenu/ Discard changes
i
shows additional information if available
