www.schaerer.com
Operation
BA JDE BARISTA ONE_EN
V01 | 07.2016
40
Waste water tank (Option)
In coffee machines with an external waste water tank, the tank needs to be emptied regularly,
at the latest when the empty instruction appears on the display.
►
Remove and empty the waste water tank.
►
Clean the waste water tank thoroughly with household cleaner and rinse with fresh water.
►
Replace the waste water tank.
Transport conditions
CAUTION!
User at risk!
Improper transporting of the coffee machine can result in injuries.
Observe the general regulations for health and safety.
►
Before moving the coffee machine, it is essential that you detach the drinking water supply,
power supply and waste water outlet.
►
Before moving the coffee machine, check the floor for obstacles and uneven areas.
CAUTION!
Risk of machine
damage!
Improper transport of the machine could damage the machine.
Adhere to the following instructions when moving machines on a cart:
•
For safety reasons, the cart must be pulled and not pushed when moving the coffee ma-
chine.
•
Only pull on the cart and never on the machine.
•
The cart is not intended for transporting cargo.
Standby
The coffee machine can be switched to standby mode to save power:
►
Press the [Service menu] field on the touch screen (see figure).
The "Service menu" appears.
►
Press the [Standby] field.
The machine switches to standby.
To take the coffee machine out of standby:
►
Press the
switch on the right side of the user panel.
An automatic system rinsing cycle is run after the steam boiler has reached its operat-
ing temperature (only with the "Start-up flush" system parameter active).
The main screen appears and the machine is ready for use.
Switching off
End of operation
►
Clean the machine.
►
Empty the drinking water container, clean it and reinstall it.
►
Empty the grounds container, clean it and reinstall it.
The manufacturer cannot be held liable for any damage resulting from unintended use of the
cart or from failure to follow the operating instructions.
