www.schaerer.com
Operation
BA JDE BARISTA ONE_EN
V01 | 07.2016
38
Hot milk (Option)
CAUTION!
Hot fluid!
►
Place a cup under the beverage outlet.
►
Press the [Hot Milk] beverage field (see illustration).
The progress of the beverage dispensing is shown on the display.
►
Remove the cup after the beverage has been dispensed.
Milk foam (Option)
CAUTION!
Hot fluid!
►
Place a cup under the beverage outlet.
►
Press [Milk foam] beverage field (see figure).
The progress of the beverage dispensing is shown on the display.
►
Remove the cup after the beverage has been dispensed.
Dispensing options
Dispensing mode
The mode for the hot water dispensing button can be configured.
The following dispensing modes are available in accordance with the beverage configuration:
•
Dosed = dispensing carried out in pre-defined quantity after the hot water dispensing but-
ton is pressed.
•
Press and hold = dispensing carried out while the hot water dispensing button is pressed.
•
Start/stop = dispensing carried out by tapping the hot water dispensing button. Dispensing
stops when the button is pressed again.
Emptying
Grounds container
►
Open the machine service door.
See "Operation" - "Dispensing options" - "Dispensing mode".
See "Dispensing options" - "Stop dispensing" to stop dispensing of the beverage and "Dis-
pensing options" - "Dispensing mode" chapter for possible dispensing variants.
See "Dispensing options" - "Stop dispensing" to stop dispensing of the beverage and "Dis-
pensing options" - "Dispensing mode" chapter for possible dispensing variants.
Dispensing options are not available in the standard self-service interface. The functions listed
in the following are active in the "Operated" mode.