Schaefer AEP-700-121, Руководство пользователя

Страница: 17 / 19

16 September 2006
5. Warranty:
We warranty this product against defects in materials and workmanship for a period of 24 months
from the date of purchase and will repair or replace any defective power inverter when directly
returned (shipping prepaid) to us.
This warranty will be considered void if the unit has suffered any obvious damage by natural and
man-made factors or has been internally or externally altered. The warranty does not cover
damage arising from improper use such as plugging the unit into an unsuitable power source,
attempts to operate products with excessive power consumption requirements or use in unsuitable
environments.
This is the only warranty that the company makes. No other warranties are expressed or implied
including warranties of merchantability and fitness for a particular purpose.
Repair or replacement are the sole remedies and the company shall not be liable for damages,
whether direct, incidental, special or consequential, caused by negligence or other fault.
Problem and Symptoms Possible Cause Solution
Low output voltage
(110V: 95-105VAC
220V: 190-210VAC) Using average reading
voltmeter Use true RMS reading meter
and cable( see page 9, Point
2-4-7 of manual)
Load Display OLP flash. Over load Reduce load.
No output voltage
Fault input voltage. Low/High input voltage Recharge battery,
check connections and cable.
(see page 11)
No output voltage
Over Temp indicator
Load less than 500W Thermal shutdown Improve ventilation ,
Make sure ventilation openings
in inverter are not obstructed ,
Reduce ambient temperature.
No output voltage,
Over load indicator Short circuit or wiring error
Very high power load Check AC wiring for short
circuit or improper polarity (hot
and neutral reversed )
Remove load.
WARNING
Do not open or disassemble the AEP-700 Inverter, Attempting
to service the unit yourself may result in a risk of electrical
shock or fire.