FLYER ON THE LEFT
FLYER ON THE RIGHT
-13-
10.3
vertical
alignment
tool
front axle
bearing
barrel nut
machine
screw
10. ALIGNING THE DRIVE WHEEL
1.
Unscrew the wing nut from the horizontal alignment tool, which has 2 nylon spacers. Keep the
spacers and washer on the bolt. Slide the bolt through any of the recessed holes in the wheel rim from
the rear frame side through to the front frame side and re-attach the wing nut, securing the tool in place.
2.
Unscrew the wing nut from the vertical alignment tool, which has 1 nylon spacer. Keep the spacer
and washer on the screw. Slide it through the recessed hole in the wheel rim that is 2 spokes (90
°
)
ahead of the horizontal alignment tool. Re-attach the wing nut, securing the tool in place.
vertical
alignment tool
horizontal
alignment tool
10.1–10.2
3.
Vertical adjustment:
Rotate the wheel forward until the vertical alignment tool is in line with the
wide leg brace. Holding the top of the drive wheel, pivot the drive wheel left or right and also pivot the
front axle bearing up and down until the alignment tool just passes by the upright of the wide leg brace
as the wheel is rotated. Tighten the barrel nut machine screw to secure the spacing.
