– 2 –
– 3 –
USING THE STROLLER
1.
For traveling: Fold the loom, making
sure that the treadles come to rest above
the rear leg brace. Tighten the fold knobs
and secure the slide lock bars (on bigger
looms only) to keep the loom closed.
The loom now sits on its stroller wheels
(Figures 1A and 1B). Remove the wing
nuts on the bolts in the front caster blocks.
Place the slots in the stroller bars over
these bolts, replace the wing nuts, and
tighten.
2.
For weaving: Remove the wing nuts
from the front caster blocks and detach
the stroller bars. Replace the wing nuts
and tighten. Loosen the fold knobs one-
quarter turn, unfold the loom, and secure
the slide lock bars on bigger looms.
Loosening the fold knobs all the
way or removing them can cause
the loom to collapse, which could
result in injury.
FIGURE 1A: USING THE STROLLER ON A MIGHTY WOLF, BABY WOLF, OR WOLF PUP LT
stroller bar
wing nut
FIGURE 1A: USING THE STROLLER ON A WOLF PUP 8.10
stroller bar
wing nut
