Scarlett SC-JE50S56, Руководство по установке

Страница: 6 / 27

IM021
www.scarlett.ru SC-JE50S56 6
ASSEMBLY:

Before assembly make sure that the appliance is disconnected from mains and the motor is not running.

Make sure that the silicone parts are in place.

Install the transparent upper part of housing on the housing and turn it clockwise until it stops. The label on
the transparent top must match the label on the housing .

Install a filter cleaner on the filter. Place the filter with holder in the transparent case. The label on the filter
must match the label on the housing .

Install the screw.

Install the feeding funnel. The label on the funnel must match the label on the housing .

Insert the rotary cover into the slots in the upper part of the neck. To load a whole fruit into the juicer, place
it in the opening of the rotary lid and turn the lid over.
OPERATION

Wash vegetables/fruits thoroughly. Peel fruits and remove seeds.

Do not use the juicer for making coco juice.

Use the juicer for making juice from:
-
Fruits: apples, oranges, pineapples, bananas, date plums, avocado, peach, mango, etc.
- Vegetables: both for hard ones (carrot, beet, cabbage, potato, batata, Canada potato), both for soft
ones (cucumber, pepper, onion, garlic), etc.
- Berries: strawberry, raspberry, pomegranate, grapes, currant, gooseberry, bilberry, etc.
- Greenery: celeriac, puppet, fennel, aloe, ginger, etc.
- Leguminosae: soybeans and nuts.

Before operation, make sure that the neck is fixed firmly.

Connect the juice extractor to mains.

Place the juice container under the juice spout. Place the cake container under the cake spout.

To switch the juice extractor on, set the I/O/R switch into the "I" position.

Load prepared fruits or vegetables into the juice extractor and gently press them with the pusher. NEVER
PUSH FRUITS/VEGETABLES BEING LOADED INTO EXTRACTOR WITH FINGERS OR OTHER
FOREIGN OBJECTS!

Load fruits/vegetables only when the motor is running.

To switch the juice extractor off, set it into the "O" position.

The lip of the juicer is equipped with cover which can be used not only as anti-drip system, which prevents
leaking the juice after the operation is finished, but also as a pulp regulator.

If the juice is extracted with opened cover, then there will be pieces of fruits and pulp on it. If the cover is
closed during operation, then the cleanliness of juice spout will be changed depending on the time of juicer
operation.

The longer juicer is working with closed cover, the cleaner juice will be as a result.

In order to get the cleanest juice it is necessary to use no more than one glass of products.

Do not use more products than can be appropriate for one glass of juice.

The juicer is equipped with reverse function. If the juice extractor is plugged up, set the switch to the "R"
position. The screw will start rotating in the opposite direction.
 NOTE: Do not directly turn the switch from “I” to “R”, otherwise, the machine may be destroyed.Turn to “0”
and waiting for the machine completely stop and then turn into next speed.

ATTENTION! Do not exceed the maximum content indicated on the bowl.

After operation, switch the appliance off and disconnect it from mains.
ADVANTAGES

Technology
«Soft Press» allows to receive juice with max content of vitamins, antioxidants and other
nutrients. The juice extractor cannot be used for making juice from bananas.
CLEANING

Remove and wash all removable parts in warm soapy water. Rinse filter assembly from under side for easy
removal of residue from strainer holes.

Do not use steel woods, abrasive cleaners or scouring pad on appliance.

To clean the outside of the motor unit, use a damp sponge.

Never immerse the body in water.

Some vegetables, such as carrots, may cause discoloration of the plastic. Reduce this by washing parts
immediately after use with small amount of non-abrasive cleaner on a cloth, rub gently, then rinse well and
dry.

The grating filter must be replaced as soon as any signs of damage or wear and tear appear.
STORAGE

Store assembled cleaned and dried juice extractor in a dry place.