Scarlett SC-HC63C69, Инструкция по эксплуатации

Страница: 5 / 19

IM021
www.scarlett.ru SC-HC63C69 5
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read this instruction manual carefully before use and keep in a safe place for future reference.

Before switching on the appliance for the first time please check if the technical specifications indicated on the
unit correspond to the mains parameters.

For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.

Do not use outdoors.

Always unplug the appliance from the power supply before cleaning and when not in use.

To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids.

Do not take this product to a bathroom or use near water.

The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for
person with lack of life experience or knowledge, if only they are under supervision or have been instructed about
the use of the unit by responsible person.

Children must be under control in order not to be allowed to play with the appliance.Do not leave the appliance
switched on when not in use.

Do not use other attachments than those supplied.

Do not operate after malfunction or cord damage.

In case of power cord is damaged, its replacement should be done by the manufacture or service department or
the other high-skill person to avoid any danger.

Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.

Keep the cord away from sharp edges and hot surfaces.

Do not place or store the appliance where it can fall or be pulled into a tub or sink.

Do not pull, twist, or wrap the power cord around the appliance.

Never insert any objects into openings in the appliance housing.

Do not put operating appliance on any surface, it may cause injury or damage.

Do not use the appliance with damaged comb, or with teeth missing from the blades as injury may occur.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature
for at least 2 hours before turning it on.

NOTE: KEEP THE BLADES OILED.

The appliance should be used only with the power supply supplied with the appliance.

The instrument must be powered only by a safe, ultra-low voltage marked on the instrument.

Do not use the hair clipper when the skin is infected.

Do not use the hair clipper on animals.

The manufacturer reserves the right to introduce minor changes into the product design without prior notice,
unless such changes influence significantly the product safety, performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the
following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX
is the year of production.
SETTING-UP PROCEDURES

The device is designed for cutting hair

Before first use cutting blades of the machine should be thoroughly lubricated.

Before the first use of the appliance completely discharge and then charge the battery.

It takes about 8 hours to charge the batteries for the first time. Each subsequent charging phase takes approx. 8
hours.

Usage time with fully charged batteries is approx. 50 minutes.

Recharge the batteries at least once in 6 months, even if the clipper is not in use.

To charge the battery, connect the plug of the power adaptor to the connector in the device, and connect the
adapter to the mains.
OPERATION

Hold detachable comb and carefully slide arms into corresponding grooves until click.

By pushing the comb slide it to one of 24 positions to set desirable cutting length.

You may also use the clipper without the attachment.

To switch on the clipper turn the switcher to the
«ON» position.

Switch off the clipper when finished, for this purpose turn the mode switch to the middle position.
THIN-OUT FUNCTION

Allows reducing hair volume without reducing its length.

Slide the thinning cutter button to pull out the thinning cutter.
REMINDERS

It is better to cut dry hair.

Comb hair carefully before cutting.

Always take off a little at a time.

For even cutting do not force the clipper. Also remember to comb the hair more frequently to remove trimmed
hair and check for uneven strands.

Cutting options are given in fig. 1.