Scarlett SC-135S, Инструкция по эксплуатации

Страница: 5 / 24

IM019
www.scarlett.ru SC-135S 5

Do not fill higher than mark on the water tank, in order to avoid spilling out of water.

The opening which is used for pouring water should be closed when the iron is in use.

Always unplug the iron from the power socket when refilling the water reservoir.
NOTE: Your steam iron is designed to use tap water. However, if the water is very hard, it is advisable to use
distilled water.

The water tank should be emptied after each use.
NOTE: If you empty the water tank after the steam iron has cooled down, set the steam iron in an upright
position on its heel rest, plug it in and set the temperature control dial to the maximum position, heat for 2
minutes.
Unplug the steam iron from the power supply.
SPRAYING

As long as there is enough water in the water tank, you may use the spray button at any temperature
setting during steam or dry ironing.

Press the spray button several times to activate the pump while you are ironing.
STEAM IRONING

With the unit unplugged, fill the steam iron with water.

Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug in.
 Set the temperature control dial to the “••“ or “•••” position.

Set the variable steam control to the desired position.
CAUTION: Avoid coming in contact with ejected steam.
DRY IRONING

The steam iron can be used on the dry setting with or without water in the water tank, however it is best to
avoid having the water tank full while dry ironing.

Turn the variable steam control to the minimum position.

Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it with
water until the steam iron cools down.
BURST OF STEAM

The burst of steam feature provides additional steam for removing stubborn wrinkles.

Turn the temperature control
dial to the “••” or “•••” position.

Turn the variable steam control to the maximum position.

Press the powerful steam button to release the burst of steam.
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button pressed for more
than 5 seconds.
NOTE: For the best steam quality, do not use more than three successive bursts each time, because the iron
will cool.
WHEN YOU FINISHED IRONING

Set the temperature dial to the minimum position.

Remove the mains plug from the wall socket.

Stand the iron on heel rest.
CARE AND CLEANING

Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled
down.

Do not use abrasive cleaners.
STORAGE

Unplug the appliance from the power supply, empty the water tank (do it after each use) and allow steam
iron to cool down completely.

Wrap the cord around the heel rest.

To protect the soleplate, place the steam iron in an upright position on its heel rest.
The symbol on the unit, packing materials and/or documentations means used electrical and electronic
units and battery’s should not be toss in the garbage with ordinary household garbage. These units should
be pass to special receiving point.
For additional information about actual system of the garbage collection address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and
environment which happens with incorrect using garbage.
RUS
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
МЕРЫ БЕЗОПАСНОСТИ
 Внимательно прочитайте данную инструкцию перед эксплуатацией прибора во избежание поломок
при использовании. Неправильное обращение может привести к поломке изделия, нанести
материальный ущерб или причинить вред здоровью пользователя.

Перед первоначальным включением проверьте, соответствуют ли технические характеристики,
указанные на изделии, параметрам электросети.