MT-6320 User Manual
- 28 -
5 Introduction to iScan
To collect data, you must install and start the scan application on the MT-6320. Partner
Tech. provides the embedded system component iScan, which can send the data decoded
by a barcode scanner to applications by simulating keypad input. The Partner Tech
products that are equipped with RFID modules are supported. These products are used to
detect compatibility of devices and demonstrate RFID applications.
5.1 Starting iScan
The iScan program is started by default after the system is started. You can also select
Start
>
iScan
to start iScan. After the iScan program is started, the iScan icon
is
displayed in the lower area of the MT-6320.
5.2 Using iScan
1.
Click
. A menu is displayed.
2.
Select the functions to be enabled. After a function is enabled,
is displayed in front of
the function.
Figure 5-1 iScan menu
5.3 Description of iScan Menu
Enable BarCode
This function supports barcode scanning and identification. The scanned barcode can be
simulated as keypad input and transmitted to the relevant application.
Enable RFID
This function supports reading IDs of RFID labels, decoding RFID labels and sending the
Содержание MT-6320
Страница 1: ...V1 0 ...
Страница 45: ...MT 6320 User Manual 42 ...