Scantech MT-6320, Руководство пользователя

Страница: 22 / 45

MT-6320 User Manual
- 19 -
★
Caution
If a connection is not established, you need to enter a correct APN again.
Disconnecting a Data Connection
To cancel an ongoing data connection, click Cancel in the Connecting dialog box.
To disconnect an established data connection, do as follows:
1.
Click the status bar. A drop-down list box is displayed.
2.
Click . A dialog box is displayed.
3.
Click
Disconnect
.
4.2.1 Wi-Fi Network Connection
You can access the Internet on the MT-6320 by using Wi-Fi.
When you connect to the Internet using Wi-Fi, you need to search and connect to an
available Wi-Fi network before you can access the Internet.
Enabling and Setting Wi-Fi
1.
At Home , click Wireless Manager .
2.
Click Wi-Fi to enable Wi-Fi.
3.
Select Menu > Wi-Fi Settings .
4.
Confirm the IP address. In the Network Adapters tab, select Marvell SDIO8686
Wireless Card and click Edit . The IP Address setting page is displayed. Ask your
network administrator which IP address should be entered. If IP addresses are assigned
over DHCP, select Use server-assigned IP address .
Figure 4-3 Wi-Fi connection setting
5.
After setting the IP address, click the Wireless tab. The MT-6320 searches for and
displays available Wi-Fi networks, which are open or secure networks.
6.
Select one Wi-Fi network to connect to the network. If you intend to connect to a secure
Wi-Fi network, you are required to enter the password of the network. After you connect