SCANMASKIN Scan Combiflex 450, Руководство пользователя

Страница: 56 / 190

56
www.scanmaskin.com
3.5 Inside vehicles

Detach the tools according to the instruction in “4.14 Changing tools”.

Secure the machine inside the vehicle.
Secure the machine according to local transport safety regulations before transporting the
machine inside a vehicle. Failure to secure the machine may result in injuries or damages.
4 Operation
4.1 Precautions
Any machine, if it is not used according the regulations, may be hazardous for op -
erating, setting-up and service personnel. The operating authority is re -
sponsible for compliance with the safety regulations during operation
and maintenance, and for the use of safety devices
supplied with the machine, as well as the provision of appropriate additional safety devic -
es!
Never operate the machine without proper tools.
Eye and ear protection must be worn at all times.
Never operate the machine when it’s not in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don’t use the ma -
chine if there are any foreign objects stuck into the surface. Before operate the machine
such objects must be removed.
Read “2 Safety Regulations” before operating the machine.
4.2 Machine functions
The gear barrel has got three grinding heads that rotates in the opposite direction of the gear
barrel. Each grinding head is equipped with a Scan-on plate where each plate hold the tools
used. See “Figure 41”.