SCANMASKIN MULTISTRIPPER, Руководство пользователя, Страница: 49 / 62

ENGLISH Multistripper / Multistripper Vario
49
www.scanmaskin.com
Do not switch off or remove the exhaust and or the ventilation devices whilst the machine is run-
ning!
All persons in the proximity of the machine must wear ear and eye protection as well as safety
shoes. In addition the machine operator must wear close-fitting protective clothing.
Only use extension cables that are sized and marked in accordance with the overall power
consumption of the machine and the valid VDE guidelines.
3.5 Electrical safety
The power source must be equipped fuses according to the table in “2. Technical specifications”.
All cables used must be marked and rated according to the fuses used.
Never connect the machine to a power source that does not provide protective earth!
Work on electrical equipment may only be undertaken by a skilled electrician or by trained per-
sons under the supervision of a skilled electrician as well as in accordance with the local electrical
engineering regulations.
Use only extension cables, that are used for extending the main cable, that are sized and marked
in accordance with the overall power consumption of the machine and the valid VDE guidelines.
The electrical equipment for the plant must be inspected regularly. Defects such as loose connec-
tions or scorched cables must be rectified immediately. Call a skilled electrician or out customer
services.
A second person must be in attendance whilst the electrical engineer is working on the equipme-
nt.
The work area must be secured against any third party entering the work area. Follow local
electrical engineering regulations while working on the machine. Never leave a machine unatten-
ded. Use only tools that are insulated against electricity.
Only start work after you are familiar with the electrical engineering regulations that apply to the
local area.
Only use voltage seekers that comply with the regulations when troubleshooting. From time to
time check voltage seekers to ensure that they are operationally efficient.
3.6 Noice level
The noise level of the Multistripper Vario has been measured in accordance with ISO 3744 at
83db. at the ear of the operator. The use of ear defenders is recommended.
Abnormal noise when idle may be caused by a worn ball bearing. This should be replaced as
soon as possible in order to prevent any breaking of the blade holder due to fatigue.