SCANMASKIN MULTISTRIPPER, Руководство пользователя, Страница: 20 / 62

20
www.scanmaskin.com
• Work on electrical equipment may only be undertaken by a skilled electrician or by trained
persons under the supervision of a skilled electrician, as well as in accordance with the local
electrical engineering regulations.
3.4 Safety regarding operation of machine
Do not allow any method of working that impairs safety!
Recognized official procedures have to be used to ensure the machine is operated in safe and
best conditions.
Only operate the machine when all safety devices and related safety equipment are present and
operational!
Check the machine visually for any damage and defects at least once a day.
In the event of operational malfunctions the machine must be shut down immediately and secu-
red!
Secure the work area around the machine in public areas providing a safety distance of at least 10
m (3.3 ft) from the machine.
Faults must be immediately rectified.
Carry out the switch on, and switch off operations in accordance with this user guide.
Before switching on the machine make sure that no-one can be endangered when the machine
starts up.
Never operate the machine when not in its upright position.
Do not switch off or remove the exhaust and or the ventilation devices whilst the machine is run-
ning!
All persons in the proximity of the machine must wear ear and eye protection as well as safety
shoes. In addition the machine operator must wear close-fitting protective clothing.
Only use extension cables that are sized and marked in accordance with the overall power
consumption of the machine and the valid VDE guidelines.
3.5 Electrical safety
The power source must be equipped fuses according to the table in “2. Technical
specifications”. All cables used must be marked and rated according to the fuses
used.
Never connect the machine to a power source that does not provide protective earth!