SCANMASKIN MULTISTRIPPER, Руководство пользователя, Страница: 17 / 62

ENGLISH Multistripper / Multistripper Vario
17
www.scanmaskin.com
1. User guide for operator
The Multistripper is used to cut loose glued down flooring materials (Lino, Vinyl, carpet etc.) from
the underlay. It works by means of a blade that by eccentric drive vibrates into the glue joint. The
Multistripper is self-propelled and it is not necessary to force it into the glue joint. The machine is
equipped with neutral gear allowing it to be used manually for removal of left-over flooring material
etc. The Multistripper is for indoor use only and must not be cleaned by use of a high-pressure cleaner
(water). This will lead to corrosion of the ball bearings and the transmission. When starting up always
check that the blade is sharp, if not, the power supply for the machine must be switched off before
changing the blade. The blade is mounted by use of 4 Unbrako socket screws. The screws are loos-
ened with the Allen key. Switch on the power supply and the vibration will start. Take the gear handle
down and the machine will move forward.
1.1 Choice of blade
The most common blade is the Normal blade used on all types of flooring material. It is neces-
sary to cut the carpet into long pieces before use. Mounted with bevel facing upwards.
Normal blade 320 mm.
If the flooring material is difficult to remove and the blade has a tendency to slip, the Aggressive
blade with a 15 degree bend may be the solution.
Aggressive blade 320 mm.
The three- edged blade with self –scoring corners. No need to pre-cut carpet into long pieces. It
can be used on all flooring materials, however, not suitable for use on loop carpets. When remov-
ing flooring materials that are particularly difficult to remove, the width of the cut can be adjusted
without stopping to 2/3 or ½. This is very useful.
Three- edged blade
2. Technical specification
Motor: AC standard motor, surface cooled, 230 volts, 11.5 Amp. 750 watt, 2800
rpm
Blade: Rocker-mounted, blade width 32 cm
Clutch: Mechanical
Measurements:
Height: 90 cm
Width: 34 cm
Length: 100 cm
Weight: 70 kg
CE sign