SCANMASKIN MULTISTRIPPER, Руководство пользователя

Страница: 19 / 62

ENGLISH Multistripper / Multistripper Vario
19
www.scanmaskin.com
Eye and ear protection must be worn at all times!
Use personnel protection equipment if necessary or required by local regulations! Take notice of
all safety and hazard notices on the machine!
All safety and hazard notices at or on the machine must be kept complete and legible!
If safety-critical changes occur to the machine or its working method, the machine must be shut
down immediately! The cause of the fault must be established, and rectified.
Changes, add-ons or conversation to the machine, which might impair safety, must not be made,
without the manufacturer’s permission!
This applies in particular to the fitting and adjustment of safety devices.
Spare parts must comply with the technical requirements specified by the manufacturer. This is
always guaranteed if original spare parts are used.
Intervals for recurring checks and inspections specified in this User Guide must be complied with!
To perform maintenance work correctly it is imperative to be equipped with the proper tools for
the task in question.
Repairs may only be made by Scanmaskin Sweden AB certified service technicians.
Some work may generate sparks under certain circumstances. Personnel working with the machi-
ne must therefore be aware of the risk of fire and how to handle a fire situation properly.
Do not use the machine in areas with highly flammable and/or explosive materials.
3.3 Personnel slection and qualification
Fundamental duties:
• Work with the machine may only be undertaken by trained personnel.
• Specify clearly the responsibilities of personnel for operation, setting up, servicing and mainte-
nance work!
• Make sure that only authorized personnel operate or work with the machine!
• Define responsibilities of the machine operator, with regard to traffic safety regulations, and
inform him not to take instructions from third parties who may not be complying with the local
safety requirements.
• Personnel, who are being trained to operate equipment, may only use the machine under
constant supervision of an experienced person!