SC&T HKM02BP-4K, Руководство пользователя

Страница: 4 / 35

3
User Manual
HKM02BP-4K
Panel view
HKM02BT-4K
HKM02BR-4K
Panel Button Function
Button - + Menu
Short Press
Reduce Number Increase Number
Menu/Cancel Enter
Press 1 seconds
Carry Decomposition
Press 3 seconds Lock/Unlock Button(When no OSD menu)
Press and hold then power on Factory Default Engineering Mode Set Factory Default then enter Engineering Mode
Reduce Number : switches channel or function number down
Increase Number : switches channel or function number up
Carry : shifts the three numbers in display one position to the left
Decomposition : shifts the three numbers in display one position to the right
In engineering mode Power and Link LED will be flash together, IP address of unit will be set to Static IP
192.168.0.88 temporarily, users can login to the web page by browser to update firmware.
Front Panel LED Indication
Panel LED Status HKM02BP-4K
Power
(Green)
On Boot completed
Flash Twice Booting
Flash Slowly
Transmitter: stop link
Receiver: video output be turned off
Breathing(Fading) Screen saver mode (not available for transmitter)
Link(Blue)
On
Connected
& video is streaming
Flash
Connecting, or no source input from transmitter
IR(Red) On Transmitting /receiving IR signal
UTP
(Green)
On
Connected by UTP RJ45 port
Flash Transmitting /receiving data from UTP RJ45 port
SFP(Blue)
On
Connected by Fiber SFP port
Flash Transmitting /receiving data from Fiber SFP port
MSG(Red)
On
Other message (IR, RS232, System
setting
…
)
Flash 2~9 Times
System warning, Alert (Refer to MSG/IR Status Indication)