SC&T HKM02BP-4K, Руководство пользователя

Страница: 16 / 35

15
User Manual
HKM02BP-4K
KEY [ 0~32 ] = address, command Set mapping of third party IR remote
KEY IMPORT Import IR key setting
BLOCK ? Status of IR quick block
BLOCK [ ENABLE | DISABLE ] Enable/disable IR quick block
BUTTON
CTRL ? Status of button control
CTRL [ ENABLE | DISABLE ] Enable/disable button control
LOCK ? Status of button lock
LOCK [ ENABLE | DISABLE ] Enable/disable button lock
ROTARY_SW
? Status of rotary switch
HKM02BT only
[ ENABLE | DISABLE ] Enable/disable rotary switch
HDCP
? Status of HDCP Always On
0~2 0=Disable, 1=HDCP 1.4, 2=HDCP 2.2
EDID
UPDATE Update EDID from monitor of RX Transmitter not support
parameter UPDATE, only
HKM02BT support loop out
Receiver not support parameter
SELECT and Mode
SELECT ? Status of TX default EDID setting
SELECT [ 0~3 ] 0=HDMI, 1=DVI, 2=VGA, 3=Loop Out
MODE ? Status of EDID process
MODE [ 0~1 ] 0=normal, 1= Patch EDID
HDMI
CTRL ? Status of HDMI 5V control Transmitter not support
parameter CTRL
CTRL [ ENABLE | DISABLE ] Enable/disable HDMI 5V control
SCREEN
? Status of screen settings
Transmitter not support this
command
[ ON | OFF ] Screen on/off
SAVER ? Status of screen saver
SAVER [ ENABLE | DISABLE ] Enable/disable screen saver
OPTION ? Status of behavior after screen off
OPTION [ 0~2 ] Set behavior after screen off
OSD
ON “string” Show “string” on screen (30 seconds)
Transmitter not support this
command OFF Turn off OSD immediately
OFF ? Status of OSD duration (ms)
OFF [ 0~65535 ] Set duration of OSD (ms)
ROUTING
? Status of free routing
Transmitter not support
parameter LOAD and SAVE
[ ENABLE | DISABLE ]
Enable/disable free routing
LOAD [ 0~3 ] Load free routing setting
SAVE [ 0~3 ] Save free routing setting
DEVICE
? Status of device number
Transmitter not support this
command
[ 0~999 ] Set device number
GROUP
? Status of group number Transmitter not support this
command
[ 0~99 ] Set group number
PARTY
? Status of party number
Transmitter not support this
command
[ 0~99 ] Set party number
NET
RECONNECT Reconnect with TX/RX
Transmitter not support
parameter DISCONNECT
DISCONNECT Disconnection (keep routing channel)
STOP Stop all connection (Include routing channel)
MULTICAST ? Status of multicast
MULTICAST [ ENABLE | DISABLE ] Disable=unicast
JUMBO_FRAME ? Status of Jumbo Frame
JUMBO_FRAME [ ENABLE | DISABLE ] Enable/disable Jumbo Frame
IP_MODE ? Status of IP mode
IP_MODE [ 0~2 ]
0=Auto, 1=static, 2=DHCP
IP ? Status of static IP address
IP [ xxx.xxx.xxx.xxx ] Set static IP address
NETMASK ? Status of subnet mask (static IP mode)
NETMASK [ xxx.xxx.xxx.xxx ]
Set subnet mask (static IP mode)
GATEWAY ? Status of gateway (static IP mode)
GATEWAY [ xxx.xxx.xxx.xxx ]
Set gateway (static IP mode)
QUERY
IP Status of current IP address
MAC Status of MAC address