MAINTENANCE
MAINTENANCE
Problem
Solution
•Working state LED
not on
•The mains plug is inserted.
•Check the programme selected.
•Check fuse in the house.
•"Full·LED on permanently
•Empty condensation container.
•lffailure,check hose for condensation outlet.
•Dryer does not start
•Check the start button has selected.
•Check the the door has closed.
•Check the programme has set.
•Water is running out
•Align dryer horizontally.
•Clear air condenser and door seals.
•Door is open by itself
•Press door untilit"clicks" into position.
•Check the clothes is over load.
•Humidity in the room is
increase significantly
•Ventilate room adequately.
•Clean the coolgrille.
•Ensure that the air condenser has been inserted.
•Degree of dryness was not
reached or drying time too
long
•Clean Iint filter and wash condenser.
•Empty container.
•Check water outlet.
•Dryer installation too restricted.
•Clean the moisture sensors.
•Use next higher drying programme or using
Timer programme.
::J
•
Technical Specifications
p
TRK 1020
Dimension(L*W*H)
615*595*845(mm)
Ambient temperature
+S"c- +35"c
Rated input power
2700W
Rated voltage
220-240V-
Rated frequency
50Hz
Refrigerant
--
Weight of product
41kg
Rated capacity
8.0kg
GWP
-
co,-
eq
-
Quantity of refrigerant
--
£warning!
If you cannot deal with the fault by yourself and need help:
• Press the [On/Off] button.
• Pull out the mains plug and call the service.
Contains fluorinated greenhouse gases covered by the Kyoto Protocol.
Hermetically sealed.
Note!
• The rated capacity is the maximum capacity,make sure that the dry clothes which
loaded to the appliance do not exceed the rated capacity each time.
• Do not install the tumble dryer in a room when there is a risk offrost occurring.At
temperatures around freezing point the tumble dryer may not be able to operate
properly.
• There is a risk of damage if the condensate water is allowed to freeze in the pump,
hoses and
I
or condensate water container.
19
20
