1 screw hole cover
2 upper hinge cover
3 special flange self-tapping screw
4 upper hinge part
5 freezing door
6 lower hinge parts
7 special flange self-tapping screw
8 supporting leg
1 Open the appliance door and unhinge
and remove all fittings from inside the
appliance.
2 Remove the upper hinge cover (2).
3 Remove the two screws (3) that con-
nect the upper hinge part (4) on the
right side of the cabinet top.
4 Carefully lift the door and place it on a
padded surface to prevent scratching.
5 Remove the screw hole cover (9) and
transfer it to the uncovered hole on the
right side of the unit. Be sure to press
the button firmly into the hole.
6 Remove the two screws (7) that hold
the lower hinge parts (6) on the right
side of the unit.
7 Remove the supporting leg (8) and
transfer it to the right side as shown in
the adjacent figure.
8 Set the door into its new place making
sure the pin enters the bushing at the
lower frame section (hole).
9 Secure the upper hinge part (4) previ-
ously removed in step 4 on the left side
of the unit. Make sure the pin enters
the bushing on the upper frame section
(hole).
10 Loosely secure the lower hinge parts (6)
and do not tighten the bolts until the
door is in the closed position and lev-
eled.
11 Insert the screw hole cover (1) on the
uncovered holes (right side).
12 Replace the upper hinge cap (2).
13 Turn the appliance upright again.
14 Open the appliance doors and attach all
fittings.
Control panel
Starting up and temperature
regulation
Insert the plug of the connection lead into
the plug socket with a protective grounding
contact. When the refrigerator compart-
ment door is opened, the internal lighting is
switched on.
The temperature selector knob is located
on the RH side of the refrigerator com-
partment.
Setting “1” means:
Highest temperature, warmest setting.
Setting “7” means:
Lowest temperature, coldest setting.