Parts and Features
View of the appliance
1 upper hinge cover
2 freezing door
3 gasket part
4 lower hinge parts
5 freezer lower drawer
6 freezer middle drawer
7 drawer panel
8 evaporator parts in freezing chamber
9 controller part
10 screw hole cover
Note: Features may vary depending on
model. Not all models will have features
listed.
Note: To get the best energy efficiency of
this product, please place all shelves, draw-
ers on their original position as the illustra-
tion above.
Installing Your New
Appliance
Cleaning before use
Before using the appliance for the first
time, wash the interior and all internal ac-
cessories with lukewarm water and neutral
soap in order to remove the typical smell of
a brand new product, then dry thoroughly.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
Installation Positioning
Warning!
Before installing, read the instruction care-
fully for your safety and the correct opera-
tion of appliance.
• Position the appliance away from
sources of heat such as stoves, radia-
tors, direct sunlight, etc.
• Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned, as specified on the rating
plate.
• This appliance performs well from N to
T.
• The appliance may not work properly if
it is left for a longer period at a temper-
ature above or below the indicated
range.
Climate class
Ambient temperature
SN
from +10°C to +32°C
N
from +16°C to +32°C
ST
from +16°C to +38°C
T
from +16°C to +43°C
Appliances must not be exposed to rain.
Sufficient air must be allowed to circulate in
the low rear section of the appliance, as
