8
A S S E M B LY
Preparing the stove for a rear outlet
Remove the top plate and top plate frame. Keep the Allen
screws for reuse when you reassemble the stove.
1.
2.
To attach the flue pipe, remove the cover plate on the rear plate
and heat shield as follows:
Drill out the four holes in the cover plates with a Ø6 bit and
remove
the
plates.
4 x Allen screws M6x10
C
C
3. Undo and remove the blanking plate from the inside.
This is to be used later as a seal and cover at the top of the
smoke
outlet.
4. Fit the separate flue collar in place from the outside and fix in
place using the bracket and seal supplied in the service pack. Fit
the frame for the top plate.
C
