2
I N S TA L L AT I O N
Table of contents
Installation ........................................................................ 2
Installation
Approval
Technical data and dimensions
Assembly ........................................................................... 3
Dimension sketch Scan
58
Unpacking
Transport
brackets
Service package
Accessories
Product registration number
Type plate
Positioning your wood-burning stove
Position near to non-flammable walls
Distance to furniture
Distance to flammable walls
Load bearing underlay
Floor plate
Connection between stove and steel chimney
Requirements for chimney
Connection with 90° elbow pipe
Adjusting screws
Fitting the stove onto the plinth
Flue collar top outlet
Preparing the stove for a rear outlet
Fresh air intake
Closed combustion system
Fitting the soapstone top
Fitting a storage door
Instruction for use ........................................................ 12
CB Technology
Primary air
Secondary air
Smoke deflector plates
Ash pan
Handle for riddling grate
Instructions for heating .............................................. 13
Lighting
Handling
fuels
Maintenance .................................................................. 14
Troubleshooting ............................................................ 16
Installation
The house owner is responsible for ensuring that all necessary nati-
onal and local safety measures are observed during installation and
fitting and also responsible for observing the fitting and operating
instructions detailed in this manual.
When you install any kind of fireplace or stove, you must inform the
local authorities. You are also responsible for calling in a chimney
sweep to inspect and authorize the installation.
To ensure best-possible functionality and safety for your installa-
tion, we advise you to call a professional fitter. Our Scan Dealer will
be able to recommend a qualified fitter in your area. For information
on Scan Dealers, please go to www.scan.dk.
Approval
If you intend to connect your stove to an existing chimney, it makes
sense to contact an authorised Scan dealer, or a local chimney sweep
for advice. These experts will also let you know if your flue needs
renovating.
On connecting to a multiple element chimney: follow the vendor‘s
instructions as applicable to the chimney type (e.g. Leca, Plewa, Ico-
pal, Isokern, Zanda etc.)
No matter whether an authorised Scan dealer installs your stove, or
you do the job yourself, remember that the chimney sweep has to
approve the installation before you start to use it.
Technical data and dimensions
CO Emission at 13% O2: 0,11% 1338 mg/Nm
3
Dust @ 13% O2: 44 mg/Nm
3
Nox @ 13% O2: 119 mg/Nm
3
Efficiency: 76%
Rated heat load: 5,5 kW
Chimney temperature: 350 °C
Flue outlet flow: 6,7 g/sec
Recommended vacuum in flue collar: 16 Pa
Combustion air requirement: 19 Nm3/h
Recommended fuel: Wood
Fuel consumption: 1,8 Kg/h
Amount of fuel: 1,4 kg
Weight: 100 kg
Flue collar internal diameter: 135 mm
Flue collar external diameter: 148 mm
Approval type: Intermittent fuelling
Intermittent fuelling means normal use of a woodstove. In other
words, you should let the fire die down until only the embers are
left, before refuelling.
The Scan
58
was build in compliance with the homologized product
type specified in the Assembly- and Instructions Manual provided
with the product.
