SCAN domestic SFO 4501, Руководство пользователя

Страница: 26 / 33

26
Program Cycle Selection
Information Description of cycle Detergent
Pre/main
Run time
(min.)
Energy (Kwh) Water con-
sump. (L)
Rinse
aid
Intensive For heaviest soiled
crockery, and
normally soiled pots
pans dishes etc with
dried on soiling. Pre-wash (50°C)
Wash (60°C)
Rinse
Rinse
Rinse (70°C)
Drying 5/22 g
1 tablets
165 1,4 16,5 *
ECO
(*EN 50242)
This is standard
programme, it is
suitable to clean
normally soiled ta-
bleware and it is the
most efficient pro-
gramme in terms of
its combined energy
and water consump-
tion for that type of
tableware. Pre-wash
Wash (45°C)
Rinse (65°C)
Drying 5/22 g
1 tablets
190 0,69 9 *
90 min For normally soiled
loads that need
quick wash. Wash (65°C)
Rinse
Rinse (65°C)
Drying 27 g
1 tablets
90 1,15 11,5 *
Rapid wash A shorter wash for
lightly soiled loads
that do not need
drying. Wash (45°C)
Rinse (50°C)
Rinse (55°C) 20 g 30 0,70 10
Starting a washing programme
• Fill the Rinse aid container.
• *EN 50242 : This programme is the test cycle. The informa-
tion for comparability test in accordance with EN 50242, as
follows: Capacity: 9 setting. Position Upper basket: upper
wheels on rails. Rinse aid setting: 6. PI:0.49w;Po:0.45w
Starting a cycle wash
• Draw out the lower and upper basket, load the dishes and
push them back. It is commended to load the lower basket
first, then the upper one.
• Pour in the detergent (see the section entitled Salt, Deter-
gent and Rinse Aid ).
• Insert the plug into the socket. The power supply is 220-240
VAC /50 HZ, the specification of the socket is 10A 250VAC.
Make sure that the water supply is turned on to full pres-
sure.
• Close the door, press the Power button, to switch on the
machine.
• Rotate the program Knob, the wash program will be
changed as follows direction: Intensive-> Eco-> 90 min->
Rapid-> Intensive.
If a program is selected, the response indicator will light.
Then press the Start/Pause button, the dishwasher begins
to start.
Note: When you press the Start/Pause button to pause during
washing, the running indicator will stop blinking and the dish-
washer will moo every minute untill you press the Start/Pause
button to start.
Change the program
Premise:
1 A cycle that is underway can only be modified if it has only
been running for a short time. Otherwise, the detergent may
have already been released, and the appliance may have
already drained the wash water. If this is the case, the de-
tergent dispenser must be refilled (see the section entitled
“Loading the Detergent“).
2 Press the Start/Pause button for more than 3s , the machine
will pause, then you can change the program to the desired
cycle setting (see the section entitled “Starting a wash
cycle”).
Note: If you open the door during a wash cycle , the machine will
pause. The program light will stop blinking and the buzzer will
moo every minute untill you close the door. After you close the
door, the machine will keep on working after 10 seconds.
If your model has broken remember function, the machine will
go on to finish the selected program after the power cut.