2
2
SC 8220 – 5004174-000 Rev. 01
Responsibility
The supplier of the equipment accepts no responsibility for injury
or damage to personnel or equipment, if the equipment is altered in
any way or used in a manner for which it was not intended at the
time of delivery.
If the conditions for use of the equipment are changed, the supplier
must be contacted or the declaration of conformity is invalidated.
Safety Precautions
This guide contains hazard information which
must
be read by all
users. The hazard information is presented as a warning as follows:
WARNING
Risk of personal injury
Warnings indicate a potential hazard to the health and safety
of users. They clearly state the nature of the hazard and how
to avoid it. The warning symbols appear at their points of
application in this guide.
Caution!
Cautions indicate a hazard to the machine, but not a danger to personnel.
They clearly state how to avoid the hazard. They appear at their points of
application in this guide.
WARNING
Risk of electric shock
Lethal voltages exist in the machine when connected to mains
power. Make sure you disconnect the power cord before
cleaning or servicing the machine.
WARNING
Risk of electric shock
The machine is of metal construction and must therefore
always be earthed to the supply. Ensure that both the plug on
the supply lead and the supply source are earthed. This is a
requirement for this type of equipment and if not adhered to
will contravene the national and international standards of
Health and Safety in the work place.
WARNING
Risk of jamming
This machine contains moving parts and sharp edges. Always be
careful. Do not touch the components inside the machine while
it is running.
WARNING
Risk of entanglement
Keep long sleeves, ties, necklaces and long hair that can trigger
the auto start sensor away from the machine. If the auto start
function is enabled, the machine may start.
