BE-D SERIES
2
INTRODUCTION
Scame BE-D wallbox is a wall-mounted DC charger designed for Battery Electric Vehicles (BEVs) and Plugin
Hybrid Electric Vehicles (PHEVs). It is compatible with either CCS type 2, or CHAdeMO, or both charging methods
depending on the configuration of choice.
The wallbox features a HMI that consists of a 7” TFT touch display, a motion and ambient light sensor, as well as
an RFID card reader. These features enable a seamless and intuitive charging experience.
The unit meets IP54 and IK10 ratings and, therefore, it is suitable to be installed both indoors and outdoors. It can
be used in private, semi-public, as well as public areas, depending on the identification strategies enabled at the
time of commissioning.
PRODUCT DESCRIPTION AND PRODUCT CODES
• Part Numbers 206.D91-E10 support CCS type 2 charging method only.
• Part Numbers 206.D91-E11 support CHAdeMO charging method only.
• Part Numbers 206.D91-E12 support both CCS type 2 and CHAdeMO charging methods nonsimultaneously.
Each configuration envisages a wireless router and an electrical cabinet with either one or two cordsets tethered
to it. Dedicated connector holders are also available to guarantee IP54 ingress protection rating and neatly store
either cordset while not being used for charging.
INTRODUCTION
2
PRODUCT DESCRIPTION AND PRODUCT CODES
2
DISCLAIMER AND PURPOSE OF THIS MANUAL
3
ACCESS CONTROL AND IDENTIFICATION MODES
3
HMI
6
CHARGING PROCESS
7
CONNECTIVITY
14
PRODUCT SPECIFICATIONS, STANDARDS and REGULATIONS
15
MAINTENANCE
17
WARRANTY
17
DISPOSAL INSTRUCTIONS
17
INDEX
