SCALES usa © 2005
Page
8 of 16
2). KEYBOARD
Figure 2
0-9 and
.
:
Numeric and decimal keys.
UNITS:
Used to toggle thru weight units. (Set default startup unit in
scale setup)
M+/
:
Add the current weight/count to the accumulator memory.
Up to 99 values or full capacity of the weight display can be
added. While in scale setup mode, this key can be used as
shift key.
TOTAL:
Recalls the total accumulated weight and count from the
memory.
UNIT WEIGHT
/CANCEL:
Used to enter the known unit weight. In the setup mode,
this key is used as a cancel and exit key.
SAMPLE /
BACK LIGHT:
Used to input the sample size or weight. Turns backlight on
in the weighing mode. (Configure backlight behavior in
scale setup mode)
QUANTITY
CHECK/<<:
Used to turn on the check weight mode and for setting
alarm quantity.
TARE/<:
Used to subtract the weight of a container. Indicates that
the current reading is the net weight. In setup mode, this
key can be used as a shift key
1