Scaleo medical Horizon S5, Руководство пользователя

Страница: 17 / 64

DOMA119_v5_20200629_ Ho
2
rizon® S5 17

When multiple troubleshooting alarms, they will show alternately. Alarms and indicators
depend on the highest priority.

The above alarms are technical alarms.

Within 3 minutes after power is on, the oxygen concentration of less than 82% will not alarm.

When a troubleshooting alarm occurs, identify the type of failure that is displayed on the LCD
and contact your service provider immediately.

The recommended test interval of the alarm system is 18 months.

The alarm sound pressure level is of 60~80 decibels
Troubleshooting
Problem Why it happened What to do
Power on, the
equipment is not
working.
The start capacity of the
compressor is broken or the
compressor is not working.
Call your service provider or dealer.
Power on, the
equipment is not
working, or works
un-continuously.
The power cord may not be
plugged correctly or there may be
a bad contact.
* Check if the power cord is damaged.
* Check if the power cord is plugged correctly.
Call your service provider, if you still cannot solve
the problem.
No oxygen outlet or
the outlet flow is
too low.
* Oxygen cannula kinked or
blocked.
* The humidifier bottle is not
tighten.
* Unknit the cannula.
* Re-install the humidifier lid.
Call your service provider, if you still cannot solve
the problem.
The ball in flow
meter is
uncontrolled by the
knob.
* The flow knob is not tighten.
* The knob was turned abruptly
or too fast.
* To tight the knob, turn the knob slowly and
softly.
Call service provider, if still cannot solve the
trouble.
Water goes back to
the cannula.
* There is a temperature
difference caused by the
weather.
* The device is too close to the
wall, curtains or furniture.
* The location of the equipment
and cannula is different.
* Dry the inside of humidifier lid.
* Do NOT use hot water.
* Do NOT over-fill the humidifier.
* Keep the equipment and cannula in the same
room to maintain the same temperature.
E
n
g
lish
E
n
g
lish