Scag Power Equipment V-TIDE II Скачать руководство пользователя | Manualshive

Страница: 11 / 87

background image

7

R

Section 2

TIE DOWN
POINT

TIE DOWN
POINT

Figure 2-3. Rear Tie Down Points

23. Use care when approaching blind corners, shrubs,

trees, or other objects that may obscure vision.

24. NEVER leave the machine running unattended.

2.6 MAINTENANCE CONSIDERATIONS &
STORAGE

1. Never make adjustments to the machine with the

engine running unless specifically instructed to do
so. If the engine is running, keep hands, feet, and
clothing away from moving parts.

2. Place the control levers in the neutral position,

engage the parking brake, stop engine and remove
key or disconnect spark plug wire to prevent
accidental starting of the engine when servicing or
adjusting the machine. Wait for all movement to stop
before adjusting, cleaning or repairing.

3. Remove spark plug wire before making any repairs.

4. Keep all nuts, bolts and screws tight, to ensure the

machine is in safe working condition. Check blade
mounting bolts frequently to be sure they are tight.

5. Do not change the engine governor settings or

overspeed the engine. See the engine operator's
manual for information on engine settings.

6. To reduce fire hazard, keep the cutting units, drives,

muffler and engine free of grass, leaves, excessive
grease, oil and dirt.

7. Park the machine on level ground.

8. NEVER allow untrained personnel to service the

machine.

9. Use care when checking blades. Use a Blade Buddy,

wrap the blade(s) or wear gloves and USE CAUTION
when servicing blades. Only replace blades. NEVER
straighten or weld blades.

10. Keep all parts in good working condition. Replace all

worn or damaged decals.

11. Use jack stands to support components when

required.

12. Carefully release pressure from components with

stored energy.

WARNING

Hydraulic fluid is under high pressure and can
penetrate skin causing injury. If hydraulic fluid
is injected into the skin, it must be surgically
removed within a few hours by a doctor or
gangrene may result.

Keep body and hands away from pinholes or
nozzles that eject hydraulic fluid under high
pressure. Use paper or cardboard and not hands
to search for leaks.

Safely relieve all pressure from the hydraulic
system by placing the control levers in the neutral
lock position and shutting off the engine before
performing any work on the hydraulic system.

If you need service on your hydraulic system,
please see your authorized Scag dealer.

13. Let the engine cool before storing.

14. DO NOT store the machine near an open flame.

15. Shut off fuel while storing or transporting.

16. DO NOT store fuel near flames or drain indoors.

«
...
9
10
11
12
13
...
»

Содержание V-TIDE II
























































































Отзывы:

Нет отзывов

Похожие инструкции для V-TIDE II

Бренд: MTD Страницы: 12

Бренд: Gardenline Страницы: 28

Бренд: Gardol Страницы: 30

Бренд: Yard force Страницы: 16

Бренд: Snapper Страницы: 66

Бренд: Poulan Pro Страницы: 56

Бренд: Gardena Страницы: 290

Бренд: Spear & Jackson Страницы: 2

Бренд: Racing Страницы: 21

Бренд: Yazoo Страницы: 12

Бренд: TYM Страницы: 169

Бренд: AEG Страницы: 36

Бренд: Craftsman Страницы: 48

Бренд: Craftsman Страницы: 48

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 21

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды