SBS SBS-2510, Руководство пользователя, Страница: 20 / 28

18
SBS-2510 Digital Density Meter
Meter
Tolerance d 0.0002 g/cm
3
The result is marked as passed if it f alls within the
f ollowing range.
d nominal ± Tolerance d
Clean Drain Users are prompted to drain the measuring cell.
Printout None The result is not printed.
7.3.1.2 Perform the test
Start the test

The SBS-2510 is set up to work with the sample pump.

The measuring cell has been cleaned.

The piston is in the lowermost position.
1 Press the Menu key .
2 Nav igate to Test .

The Test window opens.
3 Press the Start key .

The home screen opens.
4 Press the Start key .

The Standard ID window opens.
5 Enter the identif ication.
6 Press the OK key .
Rinse the measuring cell
1 Immerse the f illing tube in the water.
2 Press the OK key .

The sample pump starts and stops when the piston is in the uppermost position.
3 Hold the f illing tube ov er the waste beaker.
4 Press the OK key .

The sample pump starts and stops when the piston is in the lowermost position.
5 Clean the end of the f illing tube with a clean tissue.
6 Repeat the steps once.
Fill the measuring cell and measure the density
1 Immerse the f illing tube in the water.
2 Press the OK key .

The sample pump starts and stops when the piston is in the uppermost position.
3 Make sure there are no bubbles in the measuring cell.

The measurement starts.

When the background of the measuring ribbon changes color, the measurement is f inished.

The measured v alue is sav ed in the results.
4 Press the OK key .
Drain the measuring cell
1 Hold the f illing tube ov er the waste beaker.
2 Press the OK key .

The sample pump starts and stops when the piston is in the lowermost position.
3 Clean the end of the f illing tube with a clean tissue.
Parameter Setting Explanation