Saia-Burgess Controls AG
User Manual Standby System
│
Document 27-645
│
Edition E
NG 02
│
2017-04-26
Programming
Diagnostic
2-22
2
Referencing the program files of another device
Alternatively, you can create the file in the Program Files branch of the Primary
device, and reference them from the Secondary device (or vice-versa).
Create the program files in the Primary device, then right-click on the Secondary
device’s Program Files branch and select the “Add Files..” command. To use the
same program files, first select the Action “ Store path to file, do not copy it” - see
the picture below. If this is not selected, then “Add Files” will make new copies of
the files, which is not what you want. From the “Add Files” dialog box, navigate to
the Primary device’s directory and select the program file (or select multiple pro
-
gram files by holding Shift or Ctrl key down before clicking on each file), then press
“Add”. This adds references to the selected files to the Secondary device’s “Pro
-
gram Files” branch. You can also add individual files by selecting a single file and
pressing the “Add” button. Press “Close” when all the required files are added.
