3
SawStop
®
Professional Cabinet Saw Mobile Base
Installing Your Mobile Base - Method 1
3.
Locate the caster support, the
linkage bar, two M8 x 35 button
head socket bolts, and two M8
x 13.6 lock washers. Note that
one end of the caster support
has a mounting shoulder and
the other end does not (see
Fig.
3
a). Mount the linkage
bar to the inside of the caster
support arm nearest the end
without the mounting shoulder
as shown in Fig. 3b. Use the
button head sockets bolts, lock
washers, and a 5 mm hex key
to mount the linkage bar to the
caster support arm. Make sure
the linkage bar is positioned as
shown in Fig. 3b with the caster
support in the notch on the
linkage bar.
Fig. 3a
with mounting shoulder
without mounting shoulder
4.
With the saw resting on the packaging, facing up
and overhanging the edge, place the ends of the
two caster support arms through the two holes in
the inside right face of the saw, as shown in Fig.
4. Make sure that the caster support is oriented
so that the linkage bar is next to the front of the
cabinet.
linkage bar
caster
support
caster
support
arm
end without
a mounting
shoulder
notch
2
1
Fig. 3b
Fig. 4
linkage bar
front
mounting
shoulder
down
