13
SawStop
®
Professional Cabinet Saw Mobile Base
9. Align the front end of the caster support with the
mounting hole in the lower right corner of the front
of the cabinet and secure that end of the caster
support to the cabinet with an M8 x 20 button head
shoulder socket bolt (see Fig.
27)
. Note that this
bolt is different than the bolt used to secure the
rear of the caster support to the cabinet. Fully
tighten the bolt using a 5 mm hex key.
Fig. 27
Installing Your Mobile Base - Method 2
Fig. 26
8. The end of the caster support next to the back of
the saw is the end with the mounting shoulder.
Insert the mounting shoulder through the mounting
hole in the rear of the cabinet and secure that end
of the caster support to the cabinet with one M8
x 20 button head socket bolt, one M8 x 13.6 lock
washer, and one M8 x 18 washer (see Fig.
26).
Fully tighten the bolt using a 5 mm hex key.
10.
Locate the wheel support and the two 3 inch wheels. Note that one end of the wheel support has a mounting
shoulder and the other end does not. Mount one of the 3 inch wheels between the two support arms nearest
the end of the wheel support that has the mounting shoulder using a fixed wheel axle and an M6 lock nut from
the hardware pack (see Fig. 28). The fixed wheel axle passes through the outer support arm and threads
through the inner support arm. Fully tighten the nut using a 17 mm wrench and a 10 mm wrench.
3
2 4
5
Fig. 28
end with a
mounting shoulder
wheel
support
3 inch wheel
support arms
7
6
