1. Nev
er plac
e finge
rs, toe
s or other body
parts unde
r the m
obile ba
se.
2. Alwa
ys use
the sa
w and the
mobile
base
on a le
vel surfa
ce.
3. Lower the saw b
efore use. N
ever use
the saw when it is raised off the floor
.
4. Lower the saw slowly
, do not let it
drop back to the floor
.
!
WARNIN
G
1. Never place fingers, toes or other body
parts under the mobile base.
2. Always use the saw and the mobile base
on a level surface.
3. Lower the saw before use. Never use
the saw when it is raised off the floor
.
4. Lower the saw slowly
, do not let it
drop back to the floor
.
!
WARN
ING
18
SawStop
®
Professional Cabinet Saw Mobile Base
Installing Your Mobile Base - Method 2
22.
Mount the two 3 inch casters to the outer corners of
the support plate by inserting the threaded shaft on
each caster up through the corresponding holes in
the caster extension bar and support plate. Secure
the casters in place with two M10.5 x 20 washers,
two M10.5 x 17 lock washers, and two caster nuts,
as shown in Fig. 40. Fully tighten the caster nuts
with a 14 mm wrench.
21.
Position the caster support plate on the top of the caster support arms so that the mounting holes align as
shown in Fig. 39. Make sure that the SawStop logo faces up. Secure the support plate to the caster support
arms with two M6 x 40 hex bolts, two M6 x 16 washers, and two M6 flange lock nuts. Fully tighten the two bolts
using a 10 mm wrench and a 10 mm socket.
CONGRATULATIONS, your mobile base is now installed. You should now
re-install any extension or out-feed tables and a fence system.
13
14
15
Fig. 39
caster
support
plate
Fig. 40
3 inch casters
16
11
12
