ENGLISH
11
20
20
Min 20
Abb 5
Fig. 5
Installation der Schutzabschirmung
Heater Guard Installation
INSTALLATIoN
MouNTING THE CoMbI HEATER oN THE wALL
It is recommended that the Combi Heater is placed on the wall nearest to the door. The
air circulation created by the door should work together with the hot air generated by the
heater. For safety and convenience, follow the minimum safety distances as provided in
See page 16. Do not install the Combi Heater to the floor or wall niche. Install only one
heater in a Sauna Room. The temperature safety sensor has to be mounted above the
heater. Check the manual of the external control unit for further instructions.
Be sure to build a strong foundation for the mounting rack (e.g. cross struts in sauna pan-
eling) or reinforce the wall with a thick board to prevent the heater from collapsing. Attach
the heater to the wall with the aid of the mounting rack. Screws are provided for fastening
of the rack to the wall. To affix the heater to the rack, lift the heater and fit the nuts that
are placed at the back of the heater to the slots on both sides at the top of the rack. Lock
at least one of the side screws to prevent the heater from being accidentally moved.
CoMbI HEATER SAfETy GuARd
During operation the Combi Heater gets very hot. To avoid the risk of contact with the
Combi Heater, it is recommended to affix a safety heater guard. Guidance on installation
of such a heater guard refer to fig. 5.
