Connection of SAWO Control and Temperature
Sensor to PCB.
SAWO Control
Temperature
Sensor
SAWO Control
20
Connection of SAWO Control and Temperature
Sensor to PCB.
SAWO Control
Temperature
Sensor
Temperature Sensor
SAWO Control
21
Preventive Maintenance
Performing preventive maintenance on the Steam Generator
Unscrew and remove the Heating Element Cover of Steam Generator.
Remove 3 blue wires for three phase connection and 2 blue wires for
single phase connection.
Remove the nuts and washers that fasten the heating element.
Detach the heating element from the unit.
Brush the affected area of the heating element with Descaler Solutions.
Use steel brush for hard-to-remove scales.
After cleaning, return the heating element back to its original place.
Place the nuts and washers again to fasten the heating element.
Attach the 3 blue wires to heating element.
Screw the Heating Element Cover back to Steam Generator.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Blue
wire
Screw
Screw
Heating
element
cover
Blue
wire
Washer
Nut
