ENGLISH
4
INSTALLING THE CONTROL UNIT
Check the most suitable area to place your steam generator control. The control
and the steam generator should be accessible for the user and for maintenance. Do
not install the control unit inside the steam room! The cable connecting the control
unit and the steam generator is 7.5 meters long.
Never attempt to modify or fix the steam control. Contact your licensed technician
or your nearest service center for repair.
Before installation, main power supply of the generator must be switch off from
the circuit breaker.
Mount the control unit in the wall according to the specifications given below.
Follow the illustrations.
NOTE!
Run the Factory Reset after installing the steam generator for the first
time or after changing the control panel. See page 8.
152 mm
77 mm
Locks
1
2
Metal
Casing
Control
Panel
(Cut)
1
3
2
4
Snap-in the control panel into
the metal casing to lock.
For maintenance, pull out
the control panel using a flat
screw driver or similar.
Insert the metal casing into
the hole. Bend the locks on
the sides to hold the casing
still. If not possible because
of a thick wall, screw the
casing into the wall.
