ENGLISH
10
ON MODE
Day and Session Time
Fan (Optional)
Room Temperature
Aroma
(Optional
Steam ON
Light - Dimmer (Optional)
Steam ON
The steam generator produces steam during ON mode. In this
mode, you will find the steam button animated, indicating that
the steam session is ongoing.
Short press the Steam ON button to switch on Standby Mode.
Long press the steam button to switch OFF. If autodrain is present,
steam generator goes to Drain Mode and turns off after draining.
Day and Session Time
The day indicates current day which can be set in the Day and
Time setup in Settings Menu.
Session time is the remaining time of using the steam room. The
session time can be set until 24hours and it counts down.
When Day and Session button is pressed, a setup screen will
appear. Use arrows up and down to change the session time and
hit OK when values are set.
Maximum length of the session time can be set on the DIP
switches. (See Steam Generator DIP switches on page 14).
Temperature Setup
The temperature button indicates either the actual or target
steam room temperature (refer to Control Panel DIP switches
see page 15). Press the up and down arrow keys to change
the temperature settings inside the steam room.
