ENGLISH
12
STANDBY MODE
Current Day and Standby Time
Pause
Light
Standby Mode is activated when Steam ON button is pressed or Session Time has expired.
Optional features such as Dimmer and Fan can be set at this state.
In the Standby Mode, steam room temperature will be maintained at a certain level (refer to
standby temperature setting on page 7) Also water inside steam generator will be kept
hot to give user fast steam when starting steam session.
Current Day and Standby Time
This button displays the remaining standby time. You can
change the standby time by pressing it. Use the up and down
arrows to change settings.
The maximum standby time is set by dip switches in the
steam generator. Refer to page 14.
Pause Button
Short press the pause button to switch to On Mode. Long
press it to switch to Off Mode. If autodrain is present, long
press pause button to switch to Drain Mode.
DRAIN MODE
Only applicable when
autodrain is enabled by
the Steam Generator DIP
switches (refer to page 12)
and in the Settings Menu
(refer 3.5.4).
The autodrain feature automatically drains the water after
every use. The tank is flushed and will remain empty until the
steam generator is used again.
After the Standby Time expires, control unit automatically
switch to Autodrain mode. During the drain cycle, the steam
generator’s tank is filled with cold water so that the valve can
be opened safely.
The draining process will take about 10 minutes. You can
press the OK button to cancel the draining.
