8
8. ATTACHING THE FAN
BLADES
Caution:
Remove the screws from the
motor support plate, discard the screws
and motor support plate.
Step 1.
Attach the blade to the blade
bracket using the screws and fiber
washers as shown in Figure 14. Start screw
into bracket. Repeat for the two remaining
screws.
Step 2.
Tighten each screw. Make sure the
blade is straight.
Step 3.
Fasten blade assembly to motor
using the screws supplied. (Fig. 14)
Figure 15
Figure 14
9. INSTALLATING THE
MOUNTING PLATE
Step 1.
Remove the 1 of 3 screws from the
mounting ring and loosen the other 2
screws. (Do not remove)
Step 2.
Place the key holes on the
mounting plate over the 2 screws
previously loosened from the mounting
ring, turn mounting plate until it locks in
place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 15)
Screws
Blade
Blade bracket
Screws
Fiber
washers
Mounting
plate
Mounting ring
Screws
