10
13. OPERATING YOUR FAN
Turn on the power and check the operation
of your fan. The pull chain controls the fan
speed as follows: 1 pull- High, 2 pulls-
Medium, 3 pulls- Low, and 4 pulls-Off.
Light pull chain it controls the light in "ON"
or "OFF".
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans and so on.
The slide switch controls directions: forward
(switch left) or reverse (switch right).
NOTE:
Wait for fan to stop before changing
the setting of the slide switch.
Warm weather - (Forward) A downward
airflow creates a cooling effect as shown in
Fig. 19. This allows you to set your air
conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Fig. 20. This allows you to set your heating
unit on a cooler setting without affecting
your comfort.
Figure 19
Figure 18
Figure 20
12. FAN WITHOUT LIGHT
KIT
(OPTIONAL)
1. Disassemble the switch housing from the
light kit by removing nut and washer on the
center of switch housing, you can keep the
light kit for future use.
2. While holding the swith housing under
your fan, snap together the wire connection
plug.
(Fig. 18)
3. Attach the plastic plug to the switch
housing. (Fig. 18)
4. Install the switch housing to the mounting
plate with screws provided.
Connection plugs
Mounting plate
Switch housing
Plastic plug
Screws
