Savio High Flow Skimmer HFS12500, Руководство по эксплуатации и технические характеристики

Страница: 9 / 12

9
Troubleshooting
Faults Possible Causes Remedies
Pump chamber
runs dry during
operation
Low water level in pond.
Wier door close/stuck/obstructed
Weir not large enough for pump
flow.
Add water to pond. Water level
should be between 3/4” above or
below optimum water mark on
faceplate.
Reduce pump flow.
Install smaller pump.
Install larger weir assembly.
Water leak around
faceplate.
Faceplate screws not tight.
Faceplate not sealed properly.
Use #3 philips screwdriver to hand
tighten screw snugly.
Remove weir face, clean liner of mud
or gravel, smooth wrinkles.
Reinstall.
Filter pad requires
frequent cleaning.
Pump flow rate too high.
Heavy waste load in pond due to
fish or plant debris.
Adjust pump flow rate to be below
recommended maximum.
Remove filter pad. Add a Savio
Livingponds filter.
Jolie
Products
Inc