Position pond liner over the High Flow
Skimmer mouth and hold it in place. Smooth
liner free of wrinkles and folds. Wipe clean.
Make a 3” wide incision through the centered
liner 3/4” below the top of the High Flow
Use the a #3 screwdriver to install screws into all
four corners. Install the remaining screws.
Tighten top, bottom and sides alternately until
screw heads are flush to create a watertight
After the faceplate is secured, use a knife to
trim the liner inside the mouth of the High
FreezeFlex hose reduces plumbing
joints and the leaks that come with
them, it’s easier to use, saves instal-
lation time and increases produc-
tivity. Flexible PVC is more freeze
tolerant than rigid PVC, glues to
standard PVC fittings and its black
