Copyright © 2006 MCA Internet, LLC dba BERTL.
22 August 2006
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 11
Savin C2525
Toner Replacement Process
Users open the front door of the Savin C2525 to access
both the toner and imaging unit. A plastic protective guard
must be removed before the imaging drum can be
accessed.
To replace the toner bottle, the bottle is simply pulled out of
its docking station. During replacement, BERTL analysts
experienced no toner spill. The individual toner docking
stations have different holes to prevent the incorrect toner
supply being entered in error.
The imaging drums are protected by an additional plastic
guard. To remove the guard, a plastic lock must first be
removed using a screwdriver. To access the four imaging
stations, a lever and front plate guard is lowered. Users can
slide out the unit in need of replacement.
The image drums can be cleaned using a brush that comes
with the unit. The brush is stored on the door by sliding into
a guide hole accompanying each imaging drum.
Routine Maintenance
