18
13 ABBREVIATED USER GUIDE
To programme
To show more useful information
Modes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Press top button for 5 seconds
until display blinks. Chose mode
using < or > & press S. Adjust
settings using < or >. Press S
again to finish.
Setting
Time/date
12/24 hour clock
dd/mm/yy choice
Vary elec. Rates/& times/day
Cost alert LED levels
Zero total electricity costs
Erase all stored data
This cannot be reversed!
Messages 1 or 2 or off
Set voltage
Set CO2 rate /kWh
Time signal sync
Set time zone
Use default settings
Link a new display
Select £ $ € or ¥
Select gas price per kWh
Zero total gas costs
Set gas Cu Ft or Cu Meters
Gas conversion factor
Sync with your gas meter
Test gas transmit range
Press
1
2
3
4
5
6
7
8
9
10
11
12
Each short press of the button will
show the following:
Display shows
Back light turns on, if it is not
already illuminated
Total electricity cost since last reset
Total gas cost - since last reset
*
Electricity cost
–
last week
Electricity cost
–
last month
Electricity cost
–
last quarter
Electricity cost
–
last year
kWh used
–
current month
kWh hours used
–
this year
Kilograms CO
2
created
-
current month
Kilograms CO
2
created - current year
See “DONE”
& the default display.
User Guides are occasionally mislaid or lost. If this happens there are abbreviated instructions also printed
on a small label at the back of the display, as well as brief guide printed on the underside of the display
charging base. Alternatively, free copies are available from our web site at www.saveometer.com
Information about gas is printed in green and only applies once a gas transmitter has been installed