11
Part No. 000729, 12-m11-2012
SL-1000 Owner’s Manual
5. TROUBLESHOOTING AND MAINTENANCE
Operator Troubleshooting
Stairlift will not operate
If your stairlift will not operate, check the basic items listed below first.
1
Check the swivel seat. Is the seat locked in the riding position?
2
Check around the footrest and carriage. Is there an object on the stairway?
3
Check the residence main circuit breaker (or fuse) panel. Has a breaker
tripped or a fuse blown?
4
Make a visual check. Do you notice anything about your stairlift that is
different or out of place?
If the stairlift does not operate after checking the above items, check the code
on the diagnostic display. Refer to the table on the next page to help diagnose
the fault.
If the stairlift still does not operate, contact your Authorized Savaria Dealer.
Stairlift emits beeping sound
If at any time while the stairlift is not in motion, the unit emits a beeping sound
that lasts for approximately 20 seconds, this means that the stairlift is not
charging.
Check first that the unit is plugged in to the wall outlet.
If the beeping continues, check the code on the diagnostic display. Refer to the
table on the next page to help diagnose the fault.
If the beeping still continues, contact your Authorized Savaria Dealer.
Stairlift stops at either end of stairway and won’t restart
If the stairlift runs to either end of the stairway and then stops and won’t restart,
this means that the battery charge is low (diagnostic code
1
will be displayed).
Leave the stairlift charging until the diagnostic display shows the normal
operation code
indicating that the stairlift is ready to use.
If the problem continues, contact your Authorized Savaria Dealer.
