8
SL-1000 Owner’s Manual
Part No. 000729, 12-m11-2012
Manual Operation
The manual device allows you to operate the lift manually.
1
Turn off power to the lift at the charger disconnect and battery disconnect.
2
For public units only: Before you can use the manual device on public units,
you must release the motor brake. To release the brake, remove the rubber
cover “R” on the side of the carriage and move the brake lever to the right
.
3
Remove the rubber cover “M” on the side of the carriage and fit the manual
operation tool onto the motor input shaft.
4
Rotate the tool clockwise for the unit to travel up the stairs and
counter-clockwise for the unit to travel down the stairs.
5
When complete, remove the tool, reset the motor brake (for public units
only) and replace the rubber plug(s). Note that the unit will not operate
when the motor brake is disengaged (public units only).
Figure 2
Figure 3
Manual device
cover “M”
Brake release cover “R”
Brake release lever
(public units only)
Motor input
shaft
(public units only)
Manual
operation
tool
