background image

Wireless Configurable Keypad for DMX Control - QRG

2     of     5

45 Perseverance Way, Hyannis MA 02601.

Copyright© 2021 Savant Systems, Inc. |  009-2075-00 |  211015

Savant.com

  |  508.683.2500

Wiring Diagrams

The keypad’s rear panel includes a 4-pin connection that accepts the supplied keypad station pigtail cable. The connector is keyed to 

avoid plugging the connector backward. Use wire-nuts or an approved alternative when making the connections. Wiring for both the 

DMX-DRIVER1 (5 meter LED strips) and DMX DRIVER3 (10 meter LED strips) are shown in the diagrams below.

Additional Information

 

Savant recommends using the SHA-W1000 cable when making connections between the DMX-DRIVER1 and DMX keypad. Shown in 

the diagram above is the SHA-W1000 cable with the recommended wire colors and connections.

 

Savant recommends the HLG-240H-24 power supply shown in the diagram. This transformer can supply the 24V DC needed to 

power the DMX keypad.  However, other power supplies such as the SHA-POWSINGLE transformer or the +/- ports on the SKL-

3040/1010 keypad power and control module can be used.

 

See the 

Maximum Wiring

 section in the table above when making connections between the DMX Keypad and DMX Driver.

 

Up to 32 DMX devices are supported on each DMX keypad. This includes the combination of drivers, lighting fixtures, and LED 

strips. Do not exceed 32 RDM devices as listed in the RDM tab of the OLA server. 

 

Do not run DMX signaling in the same conduit as the high voltage AC lines.

 

Fixtures/loads will not illuminate when there is no DMX signal present

 

See the DMX Keypad Deployment Guide on the 

Savant Customer Community

 for additional wiring diagrams.

WPX/WIX-xxLV06

Back Panel

Wiring for the 

WRGB LED 

Strip shown

120/240V AC

120-277V AC

DC +24V
G

R
B
W

N = Neutral (White)
L = Hot (Black)

DMX-DRIVER1

N

L

+

+

W/CW

B/WW

GND

D+

D-

G/CW

R/WW

N/C

OUTPUT

INPUT

Blue = Neutral
Green w/Yellow Stripe = Gnd
Brown = Gnd

HLG-240H-24

POWER SUPPLY

-

+

D+

D-

24V DC Gnd
24V DC Input

D+ (data)
D- (data)

Black
Red

Blue

Yellow

Station Pigtail

Length - 5 

½

 inches

Gauge - #22 AWG stranded.

SHA-W1000

24V DC

DMX-DRIVER1

Отзывы: