4. IP Network Requirements
Savant requires the use of business class/commercial grade network equipment throughout the network to ensure the
reliability of communication between devices. These higher quality components also allow for more accurate
troubleshooting when needed.
Connect all Savant devices to the same local area network (LAN), virtual local area network (VLAN), or subnet as the
host. Savant recommends not implementing any type of traffic or packet shaping in your network topology for the
Savant devices as this may interfere with performance.
Network Configuration
To ensure that the IP address will not change due to a power outage, a static IP address or DHCP reservation should be
configured. Savant recommends using DHCP reservation within the router. By using this method, static IPs for all
devices can be managed from a single UI avoiding the need to access devices individually.
Setting DHCP reservation varies from router to router. Refer to the documentation for the router to configure DHCP
reservation.
Matrix IP Settings
Use the Network tab within the Web UI. See
Appendix B - Retrieving and Setting IP Address
for details.
Network Changes
The SmartAudio matrix requires rebooting after connecting to a new network, changing routers, or if the IP address
range is changed in the current router.
To reboot the matrix:
•
Cycle Power
Disconnect the controller from the AC power source for 15 seconds and then reconnect.
•
Hot Plug the Ethernet (LAN) Connection
Disconnect the Ethernet (LAN) connection from the controller for 15 seconds and then reconnect.
NOTE:
Resetting the unit via the front panel will set the network connection to DHCP. Keep this in mind for units that
are set to a static IP address.
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
009-1067-03 140806
9 of 30
