6.
Repeat steps 3 through 5 for all inputs that require reconfiguring.
NOTE:
Changes to input type will not appear in the web UI until a service that uses the reconfigured slot has been
activated.
7.3. Add the AV Sources
While the SSA-3220 can be used with sources connected directly, it may also be used with a SmartLink matrix switch
utilizing the digital audio outputs. Adding this to the system will expand the capabilities of the system allowing for the
highest level of flexibility.
For details on deploying the SmartLink matrix, see the SmartLink Blueprint Deployment Guide found on
dealers.SavantSystems.com
.
Tip:
If a SmartLink matrix is being used, sources for the system may be connected to the SmartLink matrix and will
not require connection to the SmartAudio matrix. Be sure and plan out source routing before making any source
connections.
Note:
Digital inputs 17 to 28 can be configured for either digital coax or optical. See
Configuring Digital Inputs
before
making any digital input connections.
1.
Place the source onto the layout, and select the appropriate room.
2.
Connect the Audio output of the source to the an Audio input on the SmartAudio matrix.
3.
Connect control for the source to the appropriate type of connection on the controller.
4.
Repeat steps 1 to 3 for all sources in the system.
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
Savant
®
SmartAudio Matrix Switch Blueprint Deployment Guide
009-1067-03 140806
14 of 30
